Bed Frame
Posted by Dave Eddy on Jan 30 2016 - tags: diyI got tired of the metal frame + box spring combo for my bed so I decided to make something better.
Also, the metal frame would slide around because the wheels were broken and wouldn’t lock, so this new bed is on rubber grips and is almost unmoveable.
Workbench
Posted by Dave Eddy on Jan 15 2016 - tags: diyI built a workbench modeled after one that my dad had built in his garage. The design is very straight-forward, it follows conventions for framing a wall or a floor, with 2x4 studs nailed in 16” on center to support the desktops.
I liked the workbench so much I built a second right after, and connected the two together with a piece of 3/4” plywood to hold my chop saw!
Farm Table
Posted by Dave Eddy on Jan 08 2016 - tags: diy3 days to finish this! I started assembly on Wednesday and had to have everything finished by Friday for my birthday party. Followed plans from http://www.diypete.com/how-to-build-a-farmhouse-table/
Stepping Stool
Posted by Dave Eddy on Dec 27 2015 - tags: diyA simple stepping stool made out of 2x4’s and 1x6 cedar pieces. Legs joined to the top with pocket hole screws
Edison Lamps
Posted by Dave Eddy on Dec 25 2015 - tags: diy
Coffee Table
Posted by Dave Eddy on Dec 25 2015 - tags: diyA coffee table made with 4x4’s for legs, 2x4’s for the frame, and 1x4’s for the table top. All joints are made with a good old hammer and nail.
Coffee Mug Rack
Posted by Dave Eddy on Dec 20 2015 - tags: diyA coffee mug rack made out of strictly 1x4 pieces nailed and glued together. I don’t have many pics of this project in progress.
Nightstand
Posted by Dave Eddy on Dec 06 2015 - tags: diyA simple nightstand made with 2x4’s for support, and 1x4’s for looks. The top is made out of 1x6 cedar pieces, and inside is an LED bulb to give the piece an inner glow.
